TCR AUTOMOTIVE & PERFORMANCE / CATALOG PERFORMANCE PARTS LIST

TOYOTAPerformance.com specializes in Toyota Performance Parts for 20R, 22R, 22RE, 4AG, 2RZ, 3RZ, 2TR, 3VZ, 5VZ, 1GRFE, and most other toyota engines models. Whether you run a Rock Crawling Off Road 4×4, Slammed Tacoma Truck or a Dirt Track Modified Mini-Stock Celica, TOYOTAPerformance.com has the Toyota Performance Parts and Accessories to make your Toyota perform at its best.

ATTENTION: International orders will have all shipment prices quoted in house. Due to the size and weight of the products we ship this is the only way we can accurately quote shipping amount out of the United States.

HEADLIGHT CONVERSION KITS:

Everyone should update their dim stock headlight bulbs to a set of Rampage H4 Conversion Headlights that are a direct replacement, 60% more luminescence and D.O.T. approved. This is a simple 10 minute installation that requires only a screwdriver and the results will be incredible. Kit includes a pair of durable die-cast aluminum housings with solid clear glass lens and 2-H4 55/60W Bulbs. Imagine a whole new brighter nighttime driving experience that’s safer and less fatiguing.
3061017-2T

H4 Headlight Conversion Kit 1979-1981 Pickup,
1969-1987 FJ40 & FJ60

PART # 3061017 $89.99

MASTER REBUILD KITS:

Toyota engines are known for their longevity. So it is no surprise to see some of these with 200,000 plus miles on them. Unfortunately they will need some attention eventually and that is exactly where Master Rebuild Kit comes in. With all the components you need to go through that tired old engine and freshen it back up. The Master Rebuild Kit comes standard with Street Performer Cast Pistons, piston rings, wristpins, wristpin locks, main, rod & thrust bearings, complete gasket kit, timing chain kit, new water pump, Pro Oil Pump and freeze plugs.
Kit Includes:
Street Performer Cast Pistons
Piston Rings, Wristpins & Wristpin Locks
Main, Rod & Thrust Bearings
Complete Gasket Kit
Timing Chain Kit
New Water Pump
Pro Oil Pump
Freeze Plugs
1010000-2T

Master Rebuild Kit – 20R (75-80)

PART # 1010000 $594.95

1010003-2TMaster Rebuild Kit – 22R/RE (1981)

PART # 1010003 $594.95

1010106-2TMaster Rebuild Kit – 22R/RE (1982-1984)

PART # 1010004 $594.95

1010112-2TMaster Rebuild Kit – 22R/RE (85-95)

PART # 1010006 $594.95

1010005-2TMaster Rebuild Kit 22RET (1986-1987)

PART # 1010005 $694.95

1010009-2TMaster Rebuild Kit 2RZ 1995-2004

PART # 1010009 $499.95

1010012-2TMaster Rebuild Kit 3RZ 1995-2004

PART # 1010012 $599.95

MASTER REBUILD FOR YOUR CYLINDER HEAD

The Pro Series cylinder heads are designed as a stock replacement with some mild performance upgrades. Now you can refresh your old cylinder head and make it a Pro in your own garage with this kit. Great for any stock application or mild performance build-up. The Pro Series heads are compatible with stock fuel injection and will give you performance gains of 18-20 HP over stock! Camshaft and Cylinder Head NOT included!
Kit Includes:
45.5mm Stainless Steel Intake Valves
37.5mm Stainless Steel Exhaust Valves
Street Valve Springs
Street Retainers
Hardened Keepers
OEM Toyota Viton Seals
New Intake & Exhaust Studs
Hardened Valve Spring Shims

1021029-2T

Pro Cylinder Head Carbureted Kit 22R 1981-1995

PART # 1021029 $259.00

1021026-2T

Pro Cylinder Head Kit 22RE 1985-1995

PART # 1021026 $259.00
Valve Lift
.100 .150 .200 .250 .300 .350 .400 .450
Intake Flow
58.3 84.9 105 120 129 134 138 139
Exhaust Flow
45 79 99 111 123 136 148 148

Economy Master Rebuild Kits:

Time to rebuild that tired engine but you are on a tight budget? No worries, These Economy Master Rebuild Kits offer the high quality parts you expect, but with a lower cost to help your budget stay on track, and no lower cost does not mean low quality.
Kit Includes:
Street Hyper Pistons Hypereutectic pistons are a much stronger piston that will not absorb as much heat as a cast style piston. That means you can make more power with less wear on your engine!! Pistons come with new wristpins, locks and are available in standard, +.020″, +.030″, +.040″ or +.060″ bore sizes.
Hastings Piston Rings Hastings piston rings are built with ductile iron, plasma moly top compression rings. They have conventional cast iron second rings and 3-piece, standard-tension stainless steel oil rings. These ring sets are ideal for street use, race applications, and mild levels of nitrous or forced induction. NOTE: These are not a gapless ring set
Pin Bushings
These bronze pin bushings will replace the worn out bushings in your stock rods.
Main, Rod & Thrust Bearings
Main bearing are available in standard, +.010, +.020″ or +.030″. Rod bearings are available in standard, +.010, +.020″ +.030″, or +.040″. Thrust bearing all come in standard size.
Complete Gasket Kit
These high quality gasket kits include A composite head gasket and all the other gaskets you need to re-assemble your engine.
Timing Chain Kit
Single row timing chain kits include: chain, plastic guides, tensioner and sprockets.
Oil Pump
This kit comes with an Aisin oil pump. This is the same pump you will get at your Toyota dealer at a fraction of the cost.
Brass Freeze Plugs
Brass replacement freeze plugs will last longer than steel or aluminum and give you that extra protection for your engine.
BEFORE ORDERING:    
WE WILL NEED TO KNOW WHAT SIZE PISTONS YOU WILL NEED. WE ALSO NEED BEARING SIZES FOR RODS AND MAINS.
WE DO EXCHANGE UNOPENED PARTS, ALL BOXES ARE CLEARLY MARKED ON THE OUTSIDE WITH THE SIZE, CHECK AND VERIFY EVERYTHING BEFORE OPENING THE BOX. WE RECOMMEND KNOWING YOUR SIZES BEFORE ORDERING. BEFORE DOING ANY BORING ON ANY BLOCK, YOUR MACHINE SHOP SHOULD HAVE THE PISTONS IN ORDER TO FIT THEM CORRECTLY.
IF YOU ORDER STANDARD SIZE PISTONS PLEASE UNDERSTAND THAT WE DO NOT EXCHANGE STANDARD SIZE PISTONS ANY LONGER. THE REASON FOR THIS IS THAT MOST OF THE BLOCKS NEED TO BE OVER-SIZED FOR THE CORRECT CLEARANCES.

1010100-2TEconomy Master Rebuild Kit 20R 1975-8/1977

PART # 1010100 $324.95

1010103-2T

Economy Master Rebuild Kit 20R September of

1977-1980

PART # 1010103 $324.95

22R EARLY :

1010106-2TMaster Rebuild Kit 22R 1981-1984

PART # 1010106 $324.95

22R/RE LATE :

1010003-2TMaster Rebuild Kit 22R/RE(85-95)

PART # 1010112 $299.95

22R/RE TURBO :

1010005-2TMaster Rebuild Kit 22RET (86-88)

PART # 1010115 $324.95

22RZ 2.4 LITER

1010009-2Master Rebuild Kit 2RZ 1995-2004

PART # 1010009 $499.95

3RZ2.7 LITER :

1010012-2TMaster Rebuild Kit 3RZ 1995-2004

PART # 1010012 $599.95

3VZ 3.0 LITER V6 :

1010009-2Master Rebuild Kit 3VZ 1989-1992

PART # 1010123 $474.95

1010129-2TMaster Rebuild Kit 3VZ 1993-1995

PART # 1010129 $524.95
ADD UPGRADE OPTIONS :
HEADS
GASKETS
STUDS

5VZ 3.4 LITER V6 :

1010013-2TMaster Rebuild Kit – 5VZ 1995-1999 Tacoma, 4Runner & Tundra

COMES WITH MLS HEAD GASKET

PART # 1010013 $774.95

1010014-2TMaster Rebuild Kit 5VZ T100

COMES WITH MLS HEAD GASKET

PART # 1010014 $774.95

1010016-2TMaster Rebuild Kit 5VZ 1995-2004 With MLS Head Gaskets Tacoma, 4Runner & Tundra

COMES WITH MLS HEAD GASKET

PART # 1010016 $874.95

1FZ-FE 4.5 LITER I6 :

1010080-2T

4.5L 1FZ-FE 1993-1997 Land Cruiser Master Rebuild Kit

PART # 1010080 $696.10

3FE 4.0 LITER I6 :

imagecomingsoon

4.0L 3FE 1988-1992 Land Cruiser Master Rebuild Kit

PART # 1010082 $446.26

2UZ-FE 4.7 LITER V8 :

imagecomingsoon

4.7L 2UZ-FE 1998-2004 Land Cruiser & Tundra Master Rebuild Kit

PART # 1010084 $969.28

Street Stroker Kits :

What is a stroker crankshaft? It’s 5mm more stroke! (That’s 1/4 of an inch.) Usable power is what the stroker crank will give your engine. It increases the torque of the 22R engine as much as 25 FT/LBS. This means more pulling power for a 4×4 application or increased acceleration for your circle track car. Best yet, you can use this with any type of engine set-up, including the factory EFI system with no adverse side effects. High compression or low compression, we have the pistons to make the stroker crank work for your application. With this kit you will have to re-utilize your stock forged Toyota Rods
We have a full line of performance crankshafts for every 22R/22RE application. All crankshaft cores are tested and inspected for imperfections before we begin working on them. Only the most select cranks are used for our production. All crankshafts are priced outright. No core charges!
Street Stroker Kit 2.5L Includes :
93mm Forged Piston in 9.7:1 or Low Compression
Street series Stroker Camshaft
Pro H-Beam Connecting Rod Set
Quality Rod Bearings
Quality Main Bearings

1010032-2TStreet Stroker Kit – 22R/22RE Without Rods 1985-1995

PART # 1010032 $1,595.00

1010034-2TStreet Stroker Kit – 22R/22RE With Street Rods 1985-1995

PART # 1010034 $1,783.00

1010036-2TStreet Stroker Kit – 22R/22RE With H-Beam Rods 1985-1995

PART # 1010036 $2,080.00

Pro Stroker Short Block Kits :

Pro Short Block Kit provides you with all the bottom end components to build your own engine.
KIT INCLUDES :
Pro Stroker Crankshaft
Pro H-Beam Connecting rods
Clevite main, rod & thrust bearings
Brass freeze plugs
Complete Gasket Set
Water pump
Pro Oil Pump
Pro Head Studs
Dual Row Timing Chain kit with metal back guides and Forged Pistons
Available upgrade main studs (+$125). All you have to do is have your local machine shop prep your block to accept these kits.

1011040-2TPro Stroker Short Block Kit – 22R/RE(81-84)

PART # 1011041 $2,600.00

1011040-2T

Pro Stroker Short Block Kit – 22R/RE/RET(85-95)

PART # 1011040 $2,600.00

Stroker Rotating Assemblies :

What is a stroker crankshaft? It’s 5mm more stroke! (That’s 1/4 of an inch.) Usable power is what the stroker crank will give your engine. It increases the torque of the 22R engine as much as 25 FT/LBS. This means more pulling power for a 4×4 application or increased acceleration for your circle track car. Best yet, you can use this with any type of engine set-up, including the factory EFI system with no adverse side effects. High compression or low compression, we have the pistons to make the stroker crank work for your application. All stroker rotating assemblies come with H-beam connecting rods for maximum strength!
Kit Includes:
Choice of 93mm low compression or 94mm Forged
Piston Set
94mm Pro Stroker Crankshaft
Pro H Beam Connecting Rods
Clevite Bearings (Main, Rod & Thrust)
We have a full line of performance crankshafts for every 22R/22RE application. All crank shaft cores are tested and inspected for imperfections before we begin working on them. Only the most select cranks are used for our production. All crankshafts are priced outright. No core charges!

1010030-2TStroker Kit – 22R Pro 2.6L

PART # 1010030 $2,075.00
Street Rotating Assemblies :
Street Short Block Kit provides you with all the bottom end components to build your own engine. This kit includes: Street Crankshaft. Street Connecting Rods, Clevite main, rod & thrust bearings, brass freeze plugs, complete gasket set, head bolts, water pump,Pro Oil Pump, dual row timing chain with metal back guides and a Street Piston Set. All you have to do is have your local machine shop prep your block to accept these kits.

1011048-2TStreet Short Block Kit – 22R/RE(81-84)

PART # 1011048 $899.95

1011051-2T

Street Short Block Kit – 22R/RE(85-95)

PART # 1011051 $899.95

22RET Street Turbo Short Block Kit

This Street Short Block Kit provides you with all the bottom end components to build your
own engine.
Kit Includes:
Street Crankshaft
Street Connecting Rods
Clevite main
Rod & Thrust Bearings
Brass Freeze Plugs
Complete Gasket Set
Head Bolts
Water Pump
Pro Oil Pump
Single Row Timing Chain with Metal Back Guides and a Street Piston Set
This kit can be upgrade to a Dual Row Timing Chain Conversion Kit for an additional $200.
All you have to do is have your local machine shop prep your block to accept these kits.

1011050-2TStreet Short Block Kit – 22RET(85-95)

PART # 1011050 $995.95
Pro Short Block Kit
This Pro Short Block Kit provides you with all the bottom end components to build your own
engine.
Kit Includes:
Pro Crankshaft
Chromoly H-Beam rods
Clevite main
rod & thrust bearings
brass freeze plugs
complete gasket set
Pro Head Studs
water pump
Pro Oil Pump
Dual Row Timing Chain Kit with metal back guides and Forged Pistons
Available upgrades main studs (+$125). All you have to do is have your local machine shop
prep your block to accept these kits.

1011042-2T

Pro Short Block Kit – 22R/RE(81-84)

PART # 1011042 $2,043.00

1011045-2T

Pro Short Block Kit – 22R/RE/RET(85-95)

PART # 1011045 $2,135.00

22R Street Top End Kits – Carb :

The key to really improving the performance of the Toyota 4-cylinder engine lies with the Top End. Meaning, the carburetion, cylinder head and exhaust header. We have assembled Top End kits with matched components to give you some proven performance for just about any application. Kits feature completely assembled cylinder head with matching camshaft along with matching carburetion and exhaust header.
The Street Top End Kit will help you achieve approximately 30-40 horsepower over stock, depending on the condition of the short block.
Kit Includes:
22R Street Cylinder Head
Your Choice Of Street Camshaft
Street Header Kit
Weber 38 Carb Kit
Pro Distributor
8 New Rocker Arms
Choice of Powder Coated Valve Cover
Top End Gasket Set

1020039-2T

Top End Kit Pro 22R Carbureted Toyota Pickup & 4Runner 1985-1995

PART # 1020039 $2,499.00

EFI Top End Kit :

The key to really improving the performance of the Toyota 4-cylinder engine lies with the Top End. Meaning, the fuel delivery, cylinder head and exhaust header. We have assembled the Top End kits with matched components to give you some proven performance for just about any application. Our EFI Pro Top End Kit includes, Pro Cylinder Head with Camshaft, Street Header Kit, K&N FIPK Filter Kit, Big Bore Throttle Body, 22RE Crane Ignition Kit, 8 New Rocker Arms, Complete Gasket Kit and Red Valve Cover.
The EFI Top End Kit can produce 30-40 horsepower over stock, while still being able to use the stock computer. Power gains will vary due to the condition of your shortblock and other components. We recommend replacing the stock fuel injectors with a set of our matched and flowed injectors to fully utilize the gains from these parts.
Kit Includes:
EFI Pro Cylinder Head
Your Choice Of Street Camshaft
Street Header Kit
22RE Crane Ignition Kit
Pro Intake Tube And Filter Kit
Big Bore Throttle Body
8 New Rocker Arms
Choice of Powder Coated Valve Cover
Top End Gasket Set
NOTE: There is an additional core charge of $100.00 on the throttle body when this item is ordered. The core amount is refunded to you when the part is shipped back to us. Core credit will not be given after 60 days from customer receiving part. Customer is responsible for any shipping charges for core return. The core charge is refunded to the original credit card used to place the order only.

1020033-2T

Top End Kit Pro 22RE/EFI Toyota Pickup & 4Runner 1985 – 1995

PART # 1020033 $2,499.00

22RE EFI Power Package :

Is your Toyota longing for that bolt-on power to get you over the hill in 4th gear? No need to look any further! We offer a high performance EFI Power Package for your Toyota 4 cylinder trucks, 22RE Fuel Injected 4WD, 2WD Pick-Up and 4Runner applications. This EFI Power Package starts with our computer designed four into one tuned exhaust header. Constructed of 16 gauge, 1 1/2″ mandrel-bent T304 stainless steel tube, a 1/2″ thick steel head flange, and a 2 1/4″ steel collector. The ceramic-coated finish gives our header a bit more edge against harsh elements for a longer life and better heat retention. These Street Performer Headers are also 50 state emissions approved. Then the 3.5mm Oversize Big Bore Throttle Body will provide over 12% increased air flow for your Toyota fuel Injected Engine.
The Kit also includes our EFI Pro Camshaft, which is as much cam we can produce without interfering with your stock computer set up. These camshafts are not re-grinds; they are ground on new billets and double heat-treated for a longer life. Each cam is designed for maximum torque and horsepower!
To complete the EFI power package, you will do away with your restrictive air cleaner assembly and replace it with our EFI Pro Intake Tube and fi lter kit. This kit does away with the stock restrictive intake tract and replaces it with our mandrel-bent stainless steel intake tube and an open-element K&N filter mounted to our custom bracket. This setup eliminates the factory air box to clean up the engine compartment.
You can expect to see gains of 20-30 HP increase with this EFI Power Package completely installed. You will be impressed with the increased throttle response. Now you can make it over that hill and still have your everyday drivability. Depending on the amount of miles on your vehicle, it is recommended to consider upgrading fuel injectors to a matched and flowed set. Optimizing the Air/Fuel ratio will open the door for more power gains from the EFI power package. This can be accomplished with one of our Wideband AFR gauge kits and our Pro A/F Tuning Module
NOTE: There is an additional core charge of $100.00 when this item is ordered. The core amount is refunded to you when the Throttle Body Core is shipped back to us. Core credit will not be given after 60 days from customer receiving part. Customer is responsible for any shipping charges for core return. The core charge is refunded to the original credit card used to place the order only.

1020009-2T

EFI Power Package – 22RE (83-88)

(Includes, Header Kit, Camshaft, Pro Air Intake Kit & Big Bore Throttle Body)

PART # 1020009 $899.95

1020008-2T

EFI Power Package – 22RE (1989-1995)

(Includes, Header Kit, Camshaft, Pro Air Intake Kit & Big Bore Throttle Body)

PART # 1020008 $949.95
Intake Performance Packages :